Byer Allagash Aluminum Cot

10.5: proj.gear/cot/shoed:
. the metal legs of this cot are staining or denting what it rests on,
so add coasters in the form of planks 2ft x 1x2" .
keeping them in place with sealing tape .

10.6: todo.gear/cot/shoed with wire:
. fix feet on cot with wire
use saw to make groove in plank
so that wire doesn't scrape on ground .
. also can drill through the plank,
so that wire is wrapped around the cot leg,
then passed throught that hole,
so that leg stays centered over that hole .
. on the bottom side, the wires pass through the groove,
then are wrapped around the plank and twisted together .